Fire Hoses
Remax Isi Mark Fire Hoses Type 1 (Old Type a)
Technical Data Sheet:
ISI TYPE-1 FIRE HOSE
ISI TYPE-1 FIRE HOSE
- IS:636-2018
- Internal Diameter:63mm
- Length: 15mtr / 30mtr
- Mass of hose: Max 425gm/mtr
- Coil Diameter: 45cm max.
- Burst Pressure: 3.5MPa (Min.)
- Proof Pressure: No Leakage at 2.1 MPa
- Kink Test: No leakage / rupture on hose at 2.1 Mpa for 30 sec.
- Change in Length: 6% (max) at 1MPa
- Change in Dia: 10% (max) at 1MPa
- Adhesion: 25mm/min (max)
Remax Isi Mark Fire Hoses Type 3 ( Old Type B)
Technical Data Sheet (Isi Type 3 Fire Hose)
- Is:636-2018 With Latest Revision (Old Is:636-1988)
- Internal Dia: 63mm
- Length: 15Mtr/30Mtr
- Mass Of Hose: 620gm/Mtr (Max.)
- Coil Dia: 55 Cm
- Max. Burst Pressure: 42Kgf/Cm2 (Min.)
- Working Pressure: 18 Kgf/Cm2
- Proof Pressure: 25 Kgf/Cm2
- Kink Test: No Leakage Or Rupture Is Found
- Change In Length: 6% Max.
- Change In Dia: 10% Max.
- Abrasion Cycle: Not Less Then 20 Cycles/Sec
- Hose Is Resistant To Acid/ Alkali/ Chemical/Liquids/ Solvents/ Abrasion And Heat Resistant Quality
Ul Listed Fire Hose Ul-19
| Diameter | Inches | 1 ½ U/L | 2 ½ U/L |
|---|---|---|---|
| Burst Pressure | PSI | 750 | 750 |
| Proof Pressure | PSI | 500 | 500 |
| Kink Test Pressure | PSI | 500 | 500 |
| Working Pressure | PSI | 250 | 250 |